UPDATE: Three alarm fire at Salisbury auto shop controlled; cause still under investigation
SALISBURY, Md. – Crews have departed as of Monday evening, after multiple fire companies battled a three-alarm fire on Martin Street in Salisbury.
Details are limited at this time, but the fire originated from the S&W Auto Body Shop. A longtime employee of the auto shop told WMDT that he was standing outside of the building when it happened, and saw black smoke billowing from the building. A few of his coworkers were inside the building at the time of the fire, but were all able to safely escape.
The auto shop is located in close proximity to the Salisbury Fire Department Station 2. The employee credited their close vicinity to the station as part of the successful response.
Crews worked to contain the fire as much as possible, as chromatic materials used for painting cars were located in the back room and are highly flammable.
Neighbors located next-door to the large fire told WMDT they believed the fire stemmed from an electrical line blowing, as they had lost power just prior to the blaze.
WMDT’s Haley Rae and Braden Hamelin were at the scene. They recalled black clouds filling the air, limiting visibility to a few feet. Sparks could be seen flying through the clouds as chemicals continued to react to the fire. The mix of the smoke and burning chemicals made breathing difficult at times and multiple loud bangs were heard from inside the auto body shop.
The Salisbury Fire Department tells WMDT they got the call at 11:49 a.m. One firefighter was transported to a local hospital for treatment of his injuries, where he is listed as being in stable condition.
SFD Assistant Chief Logan Helmuth provided a preliminary update on scene just before 2:00 p.m.
“We know the fire started in a bay, in the rear bay where the bulk of the fire was. And our city fire marshals will be investigating the cause,” Helmuth said.
Helmuth said it took firefighters around 45 minutes to control the blaze – and they were able to limit significant spread into neighboring business Finishing Technologies Inc, known as Fin-Tec.
The auto body shop sustained significant damage from the fire.
“It seems as though the entire roof is collapsed on the building. So, it’s going to be a total loss on the building. Probably will have to be demolished,” Helmuth said.
Helmuth told WMDT that while crews limited damage to Finishing Technologies — it contains hazardous materials, and hazmat crews from Worcester County were on scene to ensure that no chemicals were ignited.
Helmuth says that around 20 to 30 different fire departments responded to the scene, and credited other entities for their support during the incident.
“We really appreciate the support of the city, city police, neighboring fire departments, our mayor and council for supporting our staff for big fires like this,” Helmuth said.
While crews were gone when WMDT returned to the scene, the building continues to let off small streams of smoke as of 6:00 p.m. Helmuth had previously told WMDT that they expected to be on scene for the next several hours to extinguish the flames.
A majority of streets in the nearby area were reopened as of 6:00 p.m.
The Salisbury Fire Department posted a statement on Facebook, sharing with the community that an investigation into the fire was underway and a formal press release would be released. It has not yet been made available at the time of this publication.
Additionally, the nearby TidalHealth Edward Q. Wilgus Community Clinic will be temporarily closed until conditions improve.
WMDT will continue to update this article as details are made available.